Saturday, November 20, 2010

Hello, how do you change the wiper blades on a toyota previa van?

i know how to change blades but these are giving me the flucks!!! LOL!!! Is there a special tool or something?Hello, how do you change the wiper blades on a toyota previa van?
If you still have the original Toyota wipers, then I would recommend you buy the replacement wiper blades at your local Toyota dealer. The Do It Yourself instructions are on the back of the package bec just changed the wiper inserts on my wife's Highlander. Before doing anything, take out the new Toyota replacement wiper and measure vs one being replaced to insure you have correct size and correct one. FYI the driver's side and passenger's side on genuine wipers are different lengths. The instructions will tell you how or where to press in order to slide, separate %26amp; remove the on half with the wiper blade leaving the other half of the arm that is connected to the motor at the base. You need to observe the direction and how to reinsert this half - Before you pull off the old wiper, look closely at both ends bec they are different...one has notch. Inside there is a metal strip, one goes on each side and you will find this white plastic device to hold the wiper in place as you slide one end through tracks until it snaps into the notch. If you didn't do it right, the try aligning it again and slowly pull the wiper through each gate of the arm.... Then you can do the passenger's side...



Hope the Above Info Helps!Hello, how do you change the wiper blades on a toyota previa van?
Go to the dealer--OR go to a parts store--buy the blades and then ask the guy to help you--it takes a minute and you can actually see how it is done. Good luck

No comments:

Post a Comment